Analisis Pengendalian Kualitas Menggunakan Statistical Process Control untuk Mengurangi Produk Cacat pada Mebel UD Sadewo Jagat di Ngawi

Indah Safitri; Sunarso Sunarso

doi:10.61132/lokawati.v2i5.1216

Authors

Indah Safitri Universitas Slamet Riyadi
Sunarso Sunarso Universitas Slamet Riyadi

DOI:

https://doi.org/10.61132/lokawati.v2i5.1216

Keywords:

Product Quality, Quality Control, Check Sheet, P Control Chart, Pareto Diagram, Fishbone Diagram

Abstract

UD Sadewo Jagat is a company engaged in furniture production, this company provides sales of finished, semi-finished products and maintenance for various types of teak wood furniture. Finished products include tables, chairs, shelves and various other types of displays. However, in this study, we only analyzed defective products for wooden box table products because the production process of wooden box table products because the production process of wooden box tables experienced problems, namely the number of defects exceending 5% of the company’s standard provisions. The aim of this research is to analyze product quality control techniques using the Statistical Process Control method in reducing defective products, and to find out what factors cause defects in products produced by UD Sadewo Jagat. This research uses the Statistical Process Control (SPC) method, which is one of the analytical methods used to analyze the causes of defects that occur, both in terms of product quality and in terms of the quality of the production process. Quality control analysis is carried out using. The results of the check sheet analysis show an average of 9,6% product defects per month. From the results of the Pareto diagram, it can be seen that the highest level of defects is crack defects, with a total of 80 units or 44,94% of total product defects in 2023. Meanwhile, the results of the control chart that has been made can be seen that quality control is uncontrolled and not according to standards. From the results of the fishbone diagram, it is concluced that the factors causing product defects are human factors, materials, environment, and methods.

Downloads

Download data is not yet available.

References

Ahyari, A. (2015). Pengendalian produk (Edisi 2). BPFE.

Arianti, M. S., Rahmawati, E., & Prihatiningrum, R. R. Y. (2020). Analisis pengendalian kualitas produk dengan menggunakan Statistical Quality Control (SQC) pada usaha amplang Karya Bahari di Samarinda. Jurnal Administrasi Bisnis, 9(2), 2541–1403.

Azevedo, S. G., Godina, R., & Matias, J. C. O. (2016). Quality improvement with statistical process control in the automotive industry. International Journal of Industrial Engineering and Management, 7(1), 1–8.

Bastian, B., & Nurlela. (2013). Akuntansi biaya. Graha Ilmu.

Budi Harsanto. (2013). Dasar-dasar ilmu manajemen operasi. UNPAD Press.

Diniaty, D., & Hamdy, M. I. (2020). Analisis pengendalian mutu (quality control) CPO (Crude Palm Oil) pada PT. XYZ. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 5(2), 92–99.

Elyas, R., & Handayani, W. (2020). Statistical Process Control (SPC) untuk pengendalian kualitas produk mebel di UD. Ihtiar Jaya. Bisma: Jurnal Manajemen, 6(1), 50–58.

Heizer, J., & Render, B. (2015). Manajemen operasi (Edisi 11). Salemba Empat.

Irwan, & Haryono, D. (2015). Pengendalian kualitas statistik (Pendekatan teoritis dan aplikatif). Alfabeta.

Kotler, P., & Keller, K. L. (2012). Manajemen pemasaran (Edisi 12). Erlangga.

Lupiyoadi, R. (2013). Manajemen pemasaran jasa. Salemba Empat.

Mulyadi. (2015). Implementasi organisasi. Gadjah Mada University Press.

Putri, W. N., & Adhiutama, A. (2023). Product defect reduction using quality planning in furniture manufacturing. Journal of Economics and Business UBS, 12(1), 431–438.

Shiyamy, A. F., Rohmat, S., & Sopian, A. (2021). Artikel analisis pengendalian kualitas produk dengan. Jurnal Ilmiah Manajemen, 2(2), 32–45.

Sirregar, B., & dkk. (2013). Akuntansi biaya (Edisi 2). Salemba Empat.

Siswanto, D. J., Nuroktavia, D. A., Wahyudi, I., & Syah, T. Y. R. (2022). The effect of production planning and quality control on the final product. Journal of Social Science, 3(6), 2129–2136.

Stevenson, W. J. (2019). Production and operation management (Edisi 6). McGraw Hill.

Sugiyono. (2019). Metode penelitian kuantitatif, kualitatif. Alfabeta.

Sutawijaya, A. H., Nawangsari, L. C., & Djamil, M. (2019). Operasi strategi & proses manajemen: Pendekatan praktis untuk industri (Edisi 4). Mitra Wacana Media.

Utomo, P. (2024). Analisa penyebab rework pada proses produksi produk furniture Polo Showcase 2df Wht menggunakan metode Failure Mode and Effect Analysis (FMEA). Jurnal Kendali Teknik dan Sains, 2(1), 86–95.