Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma
(Studi Kasus PT Andalan Mandiri Busana )
DOI:
https://doi.org/10.61132/rimba.v1i3.89Keywords:
Quality Control, Six Sigma, Defect, KaizenAbstract
Quality control is crucial for the company to minimize the existence of defective products. The research focuses on the quality control section. The purpose of this study is to find out how the implementation of quality control occurs at PT Andalan Mandiri Busana, identify the factors that cause defects in garment products, and determine proposed improvements as an effort to suppress defective products. The results showed that there were factors that caused production defects and the biggest cause was broken stitches, and the sigma value obtained was 4.15, which means that the company has carried out pretty good quality control. Based on this research, the recommendations that can be given are in the improve stage, in the form of a table of proposed improvements using the Five M-checklist approach and Kaizen based on fishbone diagrams. The results of this study are expected to be one of the inputs for companies in implementing quality control and can increase the company's sigma level.
Downloads
References
Anjayani, I. D. (2011). Analisis Pengendalian Kualitas Produk Dengan Metode Six Sigma Pada CV. Duta Java Tea Industri Adiwerna - Tegal. In Skripsi. Makasar: Fakultas Ekonomi dan Bisnis …. http://lib.unnes.ac.id/2707/
Prodi, N. N. I. M., Lumbono, H., Terapan, S., & Jurusan, K. (2007). PENGENDALIAN KUALITAS PRODUKSI GARMENT DI PT . ASRINDO INDTY RAYA DENGAN MENGGUNAKAN DIAGRAM KONTROL p.
Devi, S., & Widharto, Y. (2022). Pengendalian Kualitas Produk Divisi Produksi Bagian Sewing Factory I Pt Daiwabo Garment Indonesia Menggunakan Metode Six Sigma. Jurnal Online Teknik Industri, Vol 11, No(2022). https://ejournal3.undip.ac.id/index.php/ieoj/article/view/36088
Khilbran, M., & Sakti, W. I. (2019). INDENTIFIKASI FAKTOR RISIKO HUMAN ERRORS DALAM PENERAPAN KONSTRUKSI Latar Belakang Proyek konstruksi merupakan sekumpulan aktivitas yang saling berhubungan dimana ada titik awal dan titik akhir serta hasil tertentu , proyek biasanya bersifat lintas fungsi. 3(1), 45–56.
Asih, W. (2017). Peningkatan Kinerja Sumber Daya Manusia Melalui Inisiatif Dan Orientasi Pembelajaran Serta Kemampuan Penyesuaian. Jurnal Ekonomi Dan Bisnis, 18(1), 96. https://doi.org/10.30659/ekobis.18.1.96-105
Rusilowati, U. (2020). Praktek Manajemen Sumber Daya Manusia selama Pandemi COVID-19 pada Karyawan yang Bergerak di Sektor Formal di Indonesia. Jurnal Ilmiah MEA (Manajemen, Ekonomi, & Akuntansi), 4(2), 481–491. http://journal.stiemb.ac.id/index.php/mea/article/view/721
Susiyana Maharani. (2022). ANALISIS PENGENDALIAN KUALITAS PRODUK GARMEN DENGAN METODE SIX SIGMA UNTUK MENGURANGI PRODUK CACAT (Studi Kasus: PT X).
Jaya, B. A., & Mulyono, M. (2022). Analisa Produk Cacat Menggunakan Metode Six Sigma Pada Perusahaan Garmen. Ultima Management : Jurnal Ilmu Manajemen, 14(1), 143–155. https://doi.org/10.31937/manajemen.v14i1.2590
Mayssara A. Abo Hassanin, A. (2018). Bab II Kajian Pustaka Dan Kerangka Pemikiran. Paper Knowledge . Toward a Media History of Documents, 2017, 9–29.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Rimba : Riset Ilmu manajemen Bisnis dan Akuntansi
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
