Evaluasi Tata Letak dan Optimalisasi Biaya Material Handling dengan Menggunakan Metode Craft
Studi Kasus: Rumah Kopi Banjarsengon
DOI:
https://doi.org/10.61132/lokawati.v3i3.1511Keywords:
Layout, Material handling cost, CraftAbstract
Production facility layout design is an important part that must be considered in an industry. Banjarsengon coffee house is one of the coffee suppliers in Jember with product types such as robusta and arabica coffee from the Argopuro mountains. The purpose of the research is to reduce material handling costs generated by the industry in order to produce the most optimal costs, and design a proposed layout as an alternative to help reduce material handling costs. This industry processes its products from upstream to downstream so that it has 2 production sites, namely the production house and Cafe Rumah Kopi Banjarsengon. The research was conducted with an interview approach to key informants and continued by calculating material handling costs and the Craft method. The results showed that the initial layout of Banjarsengon Coffee House resulted in material handling costs of Rp. 534,437 and after iteration through the Craft Method, an alternative layout was obtained that resulted in more efficient material handling costs of Rp. 464,302. This shows that there is a material handling cost savings of 13.1% or Rp. 70,135.
Downloads
References
Akben-Selcuk, E. (2016). Factors affecting firm competitiveness: Evidence from an emerging market. International Journal of Financial Studies, 4(2). https://doi.org/10.3390/ijfs4020009
Alamiparvin, R., Mehdizadeh, E., & Soleimani, H. (2021). A Mathematical Model for Unequal Area Stochastic Dynamic Facility Layout Problems. Journal of Quality Engineering and Production Optimization, 6(1). https://doi.org/10.22070/JQEPO.2021.5101.1124
Baladraf, T. T., Fitri Salsabila, N. S., Harisah, D., & Sudarmono, T. R. (2021). Evaluasi Dan Perancangan Tata Letak Fasilitas Produksi Menggunakan Metode Analisis Craft (Studi Kasus Pabrik Pembuatan Bakso Jalan Brenggolo Kediri). Jurnal Rekayasa Industri (JRI), 3(1), 12–20. https://doi.org/10.37631/jri.v3i1.287
Burggräf, P., Adlon, T., Hahn, V., & Schulz-Isenbeck, T. (2021). Fields of action towards automated facility layout design and optimization in factory planning – A systematic literature review. CIRP Journal of Manufacturing Science and Technology, 35, 864–871. https://doi.org/10.1016/j.cirpj.2021.09.013
Che, A., Zhang, Y., & Feng, J. (2017). Bi-objective optimization for multi-floor facility layout problem with fixed inner configuration and room adjacency constraints. Computers & Industrial Engineering Journal, 105, 265–276. https://doi.org/https://doi.org/10.1016/j.cie.2016.12.018
Choi, H., Yu, S., Lee, D. H., Noh, S. Do, Ji, S., Kim, H., Yoon, H., Kwon, M., & Han, J. (2024). Optimization of the Factory Layout and Production Flow Using Production-Simulation-Based Reinforcement Learning. Machines, 12(6). https://doi.org/10.3390/machines12060390
Erik, A., & Kuvvetli, Y. (2024). A Novel Approach for Material Handling-Driven Facility Layout. Mathematics, 12(16). https://doi.org/10.3390/math12162548
Farida, I., & Setiawan, D. (2022). Business Strategies and Competitive Advantage: The Role of Performance and Innovation. Journal of Open Innovation: Technology, Market, and Complexity, 8(163), 201–226. https://doi.org/10.3390/joitmc8030163
Hermawan, A., Chandra Kirana, C., Andani, F., Novitasari, G. N., Fahrezi, M. A., Husyairi, K. A., & Ainun, T. N. (2024). Analisis Tata Letak Rak Pada Toko Retail Menggunakan Metode ARC Dan TCR (Studi Kasus Pada Supermarket X). Jurnal Penelitian Manajemen Dan Inovasi Riset, 2(3), 263–274. https://doi.org/10.61132/lokawati.v2i3.908
Karaman, Z., Elçin, B., Solak, K. D., Erdal, S. C., Kırkavak, N., & İç, Y. T. (2024). Facility layout planning using ALDEP and SketchUp for a printing company. International Journal on Interactive Design and Manufacturing. https://doi.org/10.1007/s12008-024-02198-y
Kohls, T., Mager, F., & Regele, T. (2023). Competitive advantage and firm, industry, and country effects: An asset pricing perspective. Journal of Economics and Business, 127, 106137. https://doi.org/https://doi.org/10.1016/j.jeconbus.2023.106137
Kovács, G. (2019). Layout design for efficiency improvement and cost reduction. Bulletin of the Polish Academy of Sciences: Technical Sciences, 67(3), 547–555. https://doi.org/10.24425/bpasts.2019.129653
Kovács, György. (2020). Combination of Lean value-oriented conception and facility layout design for even more significant efficiency improvement and cost reduction. International Journal of Production Research, 58(10), 2916–2936. https://doi.org/10.1080/00207543.2020.1712490
La Scalia, G., Micale, R., & Enea, M. (2019). Facility layout problem: Bibliometric and benchmarking analysis. International Journal of Industrial Engineering Computations, 10(4), 453–472. https://doi.org/10.5267/j.ijiec.2019.5.001
Lufika, R. D., Sentia, P. D., & Maulana, I. (2021). Comparison of BLOCPLAN and CORELAP algorithm for Material Handling Improvement at M Bakery. IOP Conference Series: Materials Science and Engineering, 1082(1), 012006. https://doi.org/10.1088/1757-899x/1082/1/012006
M. Egitia Zaini, Jilan Rifa Fauziah, Angelica Meilani Rika Dwi Kusuma, Nova Pebi Rachmawati br. Sembiring, Putra Fajar Setiawan, Wawan Oktariza, & Tina Nur Ainun. (2024). Perancangan Ulang Tata Letak untuk Pengoptimalisasian Ruang pada Bebeke Om Aris Dramaga Kota Bogor. Lokawati : Jurnal Penelitian Manajemen Dan Inovasi Riset, 2(3), 214–226. https://doi.org/10.61132/lokawati.v2i3.890
Modrovský, R. (2019). Optimization of production flow through the CRAFT method. Journal Manufacturing Technology, 19(1), 114–117. https://doi.org/10.21062/ujep/253.2019/a/1213-2489/mt/19/1/114
Naqvi, S. A. A., Fahad, M., Atir, M., Zubair, M., & Shehzad, M. M. (2016). Productivity improvement of a manufacturing facility using systematic layout planning. Cogent Engineering, 3(1). https://doi.org/10.1080/23311916.2016.1207296
Pérez-Gosende, P., Mula, J., & Díaz-Madroñero, M. (2021). Facility layout planning. An extended literature review. International Journal of Production Research, 59(12), 3777–3816. https://doi.org/10.1080/00207543.2021.1897176
Quadra, G. R., Paranaíba, J. R., Vilas-Boas, J., Roland, F., Amado, A. M., Barros, N., Dias, R. J. P., & Cardoso, S. J. (2020). A global trend of caffeine consumption over time and related-environmental impacts. Environmental Pollution, 256, 113343. https://doi.org/10.1016/j.envpol.2019.113343
Rohman, T., Ramadhana, A. W. S., Ulum, T., & Fauzi, A. (2024). Strategi Pemasaran Melalui Redesain Kemasan Sebagai Upaya Meningkatan Penjualan di Rumah Kopi Banjarsengon Jember. Gudang Jurnal Pengabdian Masyarakat, 2(1), 63–69.
Rubio-Andrés, M., Linuesa-Langreo, J., Gutiérrez-Broncano, S., & Sastre-Castillo, M. Á. (2024). How to improve market performance through competitive strategy and innovation in entrepreneurial SMEs. International Entrepreneurship and Management Journal, 20(3), 1677–1706. https://doi.org/10.1007/s11365-024-00947-9
Sastoque-Pinilla, L., Artelt, S., Burimova, A., Lopez de Lacalle, N., & Toledo-Gandarias, N. (2022). Project Success Criteria Evaluation for a Project-Based Organization and Its Stakeholders—A Q-Methodology Approach. Applied Sciences (Switzerland), 12(21). https://doi.org/10.3390/app122111090
Tampubolon, T., Simangunsong, L. D. ., Sibuea, M. D. ., Sembiring, A. ., & Mardhatillah, A. (2020). Prayer paper production facility layout redesign using systematic layout planning method and CRAFT. International Journal of Science, Technology & Management, 1(4), 448–456. https://doi.org/10.46729/ijstm.v1i4.84
Tayal, A., Solanki, A., & Singh, S. P. (2020). Integrated frame work for identifying sustainable manufacturing layouts based on big data, machine learning, meta-heuristic and data envelopment analysis. Sustainable Cities and Society, 62(July), 102383. https://doi.org/10.1016/j.scs.2020.102383
Wanniarachchi, W. N. C., Gopura, R. A. R. C., & Punchihewa, H. K. G. (2016). Development of a Layout Model Suitable for the Food Processing Industry. Journal of Industrial Engineering, 2016, 1–8. https://doi.org/10.1155/2016/2796806
Zúñiga, E. R., Moris, M. U., Syberfeldt, A., Fathi, M., & Rubio-Romero, J. C. (2020). A Simulation-Based Optimization Methodology for Facility Layout Design in Manufacturing. IEEE Access, 8, 163818–163828. https://doi.org/10.1109/ACCESS.2020.3021753
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Lokawati : Jurnal Penelitian Manajemen dan Inovasi Riset
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
